Supermoto Parts and Products

Supermoto Wheels

Takasago/Excel Pro Series

The ultimate next generation Supermoto wheel

Excel Pro Series wheels sets were developed in America, for use in the most extreme conditions by some of the fastest riders.

Why are Excel Pro Series wheel sets the best?

# Excel Takasago 32 Spoke Signature Rims - Lighter than 36 spoke rim and stronger by using straight pull spokes.

# Excel Forged Hubs - T3 forged aluminium, which is lighter and stronger than billet machined or cast hubs.

# Hoshi Spokes - These quality spokes are produced by a leading Japanese OEM supplier and are the worlds strongest.

# Spline Drive Nipples - 3 times lighter than standard spoke nipples, reducing rotational and unsprung weight.

# Bearings and Seals - Featuring 3 bearings unlike most OEM wheels using only 2. Wheels supplied with all bearings, seals and spacers.

# Forged Carrier Rings - Forged T3 aluminium, again stronger and lighter than billet versions. Advantage is that if you change your bike you only need to change the carrier and not replace the whole wheel, allowing you to continue using the wheel no matter what bike you buy**. (** Excludes 17*500 Supermoto wheels)

Gold Talon Hub, Morad Rim 17*3.50 front - 17*4.25 Rear, Polished Silver Rims £720

Includes Stainless Spokes, Bolts, Spacers and Bearings

Gold Talon Hub, Morad Rim 17*3.50 front - 17*4.25 Rear, Gold or Black Rims £740

Includes Stainless Spokes, Bolts, Spacers and Bearings

Gold Talon Hub, Morad Rim 17*3.50 front - 17*4.25 Rear, Blue or Red Rims £760

Includes Stainless Spokes, Bolts, Spacers and Bearings

Cycra Pro Bend Hand Guards

Cycra Pro Bend Fitting Notes:

For the handle bar mounting system, choose the product that matches with your make of handle bars.

For the triple clamp mounting system, choose the product that matches with the direction of the fixings on your top clamp. Triple clamp systems are independant of which bars you have fitted.

ProBend Replacement Plastics

Pro Bend Enduro Replacement Plastics

Pro Bend DX Replacement Plastics

DRC Moto LED CRF-X Tail Light £8.99

Fits CRF250X/450X. Tail light and stop light in this compact-sized product. Smaller and lighter than stock LED light. 8 high-intensity LEDs are used. Long operating life. Reduce electrical consumptiom. High impact, waterproofed, shock resistant. Red Lens only. Plug type terminals are included for installation. Works on 12V AC/DC.

DRC Phantom Tail Light £10.99

High Intensity LED light for the rear fender. Tail light base is made of flex rubber,enables a great fit on all shapes of rear fenders. 8 high-intensity LEDs are used. Tail light and stop light in this compact- sized product. Red Lens only. Works on 12V AC/DC. Plug type terminals are included for installation.

DRC Moto LED License Plate Light £3.99

Chip LED lights for licence plate. Very compact design for sticking on under the rear fender. Long operating life. Reduce electrical consumption. High impact, waterproofed, shock resistant. Works on 12V AC/DC. Dimensions : L50mm x W41mm x H7mm.

DRC Edge2 Tail Light

16 high-intensity red LEDs are used for the tail / stop light, and 3 white LEDs for illuminating the license plate. Waterproofed circuit. Detachable lens. Made of high quality, pliable plastic. Flashers can be placed on the flat side of this holder. Plastic material allows for quick,and easy installation. License plate bracket and plug type terminal included as option. Red lens only. Works on 12V AC/DC.

DRC Wiring Kit £69.99

Easy to install electrical parts (excluding headlight, tail light and flashers) for competition bikes. Installation made easy. No experience necessary. Power source for this kit is completely self-contained (uses 8 AA batteries). No need to "chop" into your wiring harness. Moto LED's tail lights and flashers are recommended.

DRC Moto LED Flex Tail Light

Flex-1 and Flex-2

Flex fit shell and body with 16 high quality chip LEDs. Tail light and stop light in this compact-sized product. Even fits curved surface. Works on 12V AC/DC. Plug type terminals are included for installation. Includes aluminum bolts/nuts.(Flex-1) High impact, water and shock resistant. Dimensions : L106mm X W19mm X H7.5mm.

Flex-3

Universal LED tail light. Tail light and stop light in this compact-sized product. 12, 4mm oval LEDs. Reduce electric power consumption. Offers a longer operating life. Dimensions : L109mm X W20mm X H19mm.

Acerbis Rally Pro hand guards £44.99

Fitting kit £28.99

Acerbis Rally Pro Fitting Notes

Ensure that you select the fitting kit appropriate to your size and type of handle bars

Acerbis Spider Evolution Disk Guards £34.99

Weight saving of up to 35% compared to the traditional model

Total protection for the front brake rotor

Machined aluminum flange and insert

Double resin thermoplastic disk cover with a strong nylon center

insert and polypropylene external spoiler

Disk cover fixed to the flange with self-locking nuts and countersunk head screws

Suitable for brake disks up to a diameter of 275 mm

Includes fitting kit

Extremely easy to mount

Acerbis Supermoto Front Fender £22.99

The Acerbis Supermoto Fender is universal fitting. Just drill 4 correctly spaced holes to fit.

Apico HandGuards £49.95

Aluminium bar runs through whole guard for maximum protection

Supermoto Headlights

Acerbis Cyclopes Headlight DOT/CE Approved £89.99

The first approved headlight for all on and off-road bikes.

It can be used on non-fairing bikes to street fighters.

Exclusive customized design: nylon surround, polypropylene numberplate,

polycarbonate reflector, cast aluminium headlight body and tempered glass lens.

DOT, ECE and SAE approved

Adjustable angle

Universal fitting with anti-vibration rubber strips

Removable number plate; available in a wide variety of colors

Protective, transparent polycarbonate lens cover supplied for off-road use

Heat resistant plastic headlight support

Wiring accessories provided

Low beam fitted with 55 W halogen bulb, low beam/side light fitted with

55 W halogen bulb and 5W incandescent bulb

Acerbis CE/DOT Certified DHH Headlight £54.99

12v 35w/35/w headlamp bulb

12v 4w running light

Available in Orange, Green, Black, White, Yellow, Red and Blue

The Acerbis DHH CE/DOT Headlight is certified to be used on the road. All fittings included.

Acerbis DHH Headlight £54.99

Dual 35w halogen lamps, 10 degree pencil and 38 degree flood.

Available in Orange, Green, Black, White, Yellow, Red, Blue and Silver

The Acerbis DHH Headlight is NOT certified for steet use. All fittings included.

Acerbis Diamond Headlight £59.99

3 * 20w bulbs. 2 * 36 degree flood, 1 * 10 degree pencil.

Available in Black, White, Red, Blue, Orange and Yellow

Acerbis Diamond Replacement lense kit £9.99

Available in Clear, Smoke, Orange, Blue, Yellow and Red

The Acerbis Diamond headlight is NOT certified for street use. All fittings included.

Acerbis Modular Enduro Tail Light £25.99

Dual filament bulb for brake and tail light

You get everything that you see in the picture.

Maxxis Supermoto Tyres

Road Legal

Maxxis Supermoto tyres provide outstanding levels of grip for your Supermoto, whether for road or track use. At Roost Racing we've raced with most brands of tyres and the Maxxis gets the thumbs up from us every time. One customer even came back to the shop after we fitted a set of Maxxis Supermoto tyres to announce "My God, it's better than being on rails"

Maxxis Supermoto Fronts £63.45

Maxxis Supermoto Rears £82.25

Maxxis Race Compound Tyres

NOT for road use

Maxxis race compound tyres have been developed to provide racers with the ultimate in grip. Whether you're a sliding God or a club racer, these tyres give you so much confidence through the corners that you'll be putting in your best laps times before you know it. Whereas some tyres don't give you enough feedback, we've found that the Maxxis tyres hold no sudden surpises. A "hot" set of Maxxis will grip annd grip, a real eye opener for us.

Maxxis Supermoto Tyres (Race) Front £79.25

Maxxis Supermoto Tyres (Race) Front £105.75

Race tyres:
Wets
Intermediates
Slicks
Available in soft, medium and hard compounds

Supermoto Brakes

Supermoto calipers, supermoto brake caliper, supermoto brake disks

ISR Brake Systems and Master Cylinders

ISR Radial master cylinder (remote reservoir) £250

At last a radial master cylinder from ISR! The advantage over the already excellent ISR master cylinders is that the radial lever is more efficient, giving even more power and feel. It also has fingertip control to allow adjustment for reach and ratio whilst riding. The two piece design makes lever replacement a 20 second change. This design also has the benefit of being interchangeable for brake or clutch use permitting matching levers. Click here to see a disassembled lever.

There is no standard reach lever available. Available with 15mm or 17.5mm bore. Weight: 440g Handlebar size: 22mm

ISR Universal front master cylinder (integral reservoir) £185

This master cylinder is more compact and lightweight and is aimed more at Supermoto and touring bikes.

Available with 14mm or 17.5mm bore. Weight: 390g Handlebar size: 22mm

Supermoto Brake Kits

Moto-Master Race Systems

Moto-Master Disc, Adaptor and Caliper £417.95

Moto-Master Caliper only £348.99

Moto-Master Disk only £ 226.95

Moto-Master Street Systems

Utilises existing OEM caliper

Moto-master Disc with Adaptor £210

Moto-Master Disc only £152

Adaptor only £58

Braking 320mm Supermoto Front Disk £176

Braking 4 pot Caliper £249.99

Available for:
Honda
Husaberg
Husqvarna
Kawasaki
KTM
Suzuki
VOR
Yamaha
Please state year, make and model of bike when ordering