Roost Racing
Husky Roost Racing
Site Map
   

Pulse Racing Products

Pulse Products

Pulse cable guide and case guard

Pulse Honda Prolite Clutch Cable Guide £35.99

Select Model

Pulse CRF Case Guard £23.99

If you are a CRF450 or CRF250 owner then you will want to consider both of these products. The Pulse clutch cable guide is a must have, it eliminates the flex on the stock guard and also provides a more direct cable angle reducing clutch effort. The Pulse case guard protects that expensive ignition casing in the event of a chain de-railment and prevents chain bunching.


Pulse Launchmaster

Pulse Prolite Launchmaster £54.99

Select type
The Pulse Prolite Launchmaster is design to allow straight forward fitment onto a variety of bikes with a more tolerant fitting ring with a slotted locking groove. The locking plunger is fully rebuild able so you can replace locking plunger, spring or body should they wear. Pulse have designed their Launch master to fit models from 65cc to 650cc.



Pulse Rebound adjuster

Pulse WP Rebound Adjusters £37.99

Ever struggled to adjust your rebound adjusters on WP forks, dammed hard with gloves on and if they are wet and muddy hard without gloves on. The easy solution is to fit the Pulse WP rebound adjusters these are larger, easy to use with gloves and easy to adjust to make your forks faster or slower.


Pulse Showa adjuster

Pulse Showa Fork Adjusters £52.99

Take the strain out of the fork fade during a race or an enduro with these easy to install Pulse Racing Showa fork adjusters.



Pulse chain adjuster

Pulse Honda CR - CRF Rear Chain Adjusters £51.99

One of the most useful Honda parts for any Honda CR or CRF owner. Designed to eliminate those rear chain adjuster from dropping out into the mud these adjusters are retained in the swinging arm when the wheel spindle is removed. You never need to worry about checking the chain either it remains as you had tensioned it so it makes fixing a puncture or wheel change a breeze. Just remove the stock adjuster bolts and install the Pulse kit and you are away.


Pulse axle puller

Pulse Front & Rear Axle Pulls £23.99

Select Fitting
When the competing at the highest standards time is all important so when that unexpected wheel change or puncture arises you want to get the job done quickly. The Pulse XC axle pull range covers KTM, Yamaha, Honda, Kawasaki and Suzuki models. These are easy to fit and easy to use so take the stress out of your sport with either a front or rear wheel spindle axle pull.



Pulse chain guide

Pulse Honda CR Plastic Chain Guide (to '04) £54.99

Another genuine factory race product from Pulse. The plastic chain guide has been introduced to eliminate that annoying chain de-railment that can happen with the stock Honda guide which gets bent in ruts and rocks. The plastic guide also offers a weight saving over the stock chain guide.


Pulse FCR mixture screw

Pulse FCR Fuel Mixture Screw £10.99

Every had a problem in getting to that difficult to adjust fuel mixture screw on your FCR carb. Well you do not have to struggle if you fit the Pulse FCR fuel mixture screw. It's straight forward to fit and used by CAS Honda and Kawasaki and Yamaha race teams.



Pulse case saver

Pulse Prolite KTM Case Savers £24.99

The original case saver that is designed to accept the KTM sprocket cover. (As supplied by Pulse to KTM Austria) The Pulse case saver range covers all KTM models from the all new KTM 85 to the 540SSX. Save yourself the cost of an expensive clutch cylinder breakage with this tried and tested guard.


Pulse fuel cap bluePulse fuel cap red

Pulse Prolite Fuel Caps £36.99

Select Bike Select Colour
Since Pulse launched the ORIGINAL billet fuel cap there have been many copies or other brands come and go from the market and Pulse is the product that still sets the standard and leads the market. The Pulse Prolite cap is the latest development in the history of the billet fuel cap and has been redesigned to incorporate lighter weight improved fitting yet retains the Pulse legendary fuel cap sealing ring. Unlike other brands all the Pulse caps with the exception of the small cap that fits KTM is supplied with the Pulse fuel seal ring unlike other competitors. This ensures you get a clean seal and no unsightly leaks. Why fit a billet cap, well it's not just because the Prolite cap looks the part on your bike it also is more robust than stock plastic caps that have been known to split and leak. Prolite caps are available for Honda, Kawasaki, Suzuki and Yamaha MX and Enduro models and all European MX and Enduro models that have the small Acerbis fuel cap fitted. Colours range covers*, Black, Blue, Red and Gold (*Not all models are supplied in colours listed)



Pulse Vent Heads

Pulse Vent Heads £6.99

Select Fitting
The perfect match for the Pulse Prolite cap is the Pulse Vent Head. One of the most regularly use products in the part of the product range it not only looks great on the Pulse Polite cap it also fits and stock or aftermarket cap on the market. Available in Plain, Red, Black, Blue and Gold and supplied with Vent Hose. The Pulse Vent Head eliminates that unsightly vent hose and makes it easier to refuel the bike without having to cope with tangle stock vent hose.


Pulse Panel Bolt Kit

Prolite T7 Panel Bolt Kits £36.99
Select Bike Select Colour

This is a real factory race product and for those riders looking for the ultimate in weight saving. The Pulse Prolite T7 panel bolt kit is available in three different kits for rad panels, number plate panels and seat bolts and fitment includes all the major brands and models of bike.